Controlling the hydrophilicity of microchannels with bonding adhesives containing surfactants

Cited 12 time in scopus
Metadata Downloads

Full metadata record

DC FieldValueLanguage
dc.contributor.authorYong Taik Lim-
dc.contributor.authorS J Kim-
dc.contributor.authorH Yang-
dc.contributor.authorK Kim-
dc.date.accessioned2017-04-19T09:06:31Z-
dc.date.available2017-04-19T09:06:31Z-
dc.date.issued2006-
dc.identifier.issn0960-1317-
dc.identifier.uri10.1088/0960-1317/16/7/N01ko
dc.identifier.urihttps://oak.kribb.re.kr/handle/201005/7767-
dc.description.abstractIn this study, a novel protocol to control the hydrophilicity of microchannels as well as to bond the microfluidic devices in all polymer-based biomedical devices is suggested. It is demonstrated that the contact angle of water in the microchannel surface can be tuned using conventional pressure-sensitive adhesives (PSA) containing surfactants. The surfactants are immersed in a hydrophobic PSA film in hydrophobic environments (air). The water-adhesive interface reconstructed quickly and became hydrophilic upon contact with water. Both the contact angle and volumetric flow rate (VFR) of water in microchannels could be systematically controlled by changing the concentration of the surfactants in the PSA film and by using different types of surfactants with different chemical structures. The VFR of water changed in a two-order range (1-102 nl s-1) when the concentration of surfactants was varied from 1% to 10%. We believe that the use of surfactants favors mainly the control of flow rate and the protocol suggested here to control the flow velocity in a broad range should find a wide application. Although the hydrophilic coating formulated with surfactants has proven effective in improving the flow rate of liquid, the surfactants located at the interface could be dissolved into the fluid samples. And the beneficial result of the use of surfactants is restricted to microfluidic devices where the liquid stays briefly in contact with the channel walls. The protocol suggested in the research can be directly applied to the development of low-cost, high-speed and reliable bonding techniques for disposable polymer-based microfluidic devices.-
dc.publisherIOP Publishing Ltd-
dc.titleControlling the hydrophilicity of microchannels with bonding adhesives containing surfactants-
dc.title.alternativeControlling the hydrophilicity of microchannels with bonding adhesives containing surfactants-
dc.typeArticle-
dc.citation.titleJournal of Micromechanics and Microengineering-
dc.citation.number7-
dc.citation.endPageN16-
dc.citation.startPageN9-
dc.citation.volume16-
dc.contributor.affiliatedAuthorYong Taik Lim-
dc.contributor.alternativeName임용택-
dc.contributor.alternativeName김성진-
dc.contributor.alternativeName양해식-
dc.contributor.alternativeName김규원-
dc.identifier.bibliographicCitationJournal of Micromechanics and Microengineering, vol. 16, no. 7, pp. N9-N16-
dc.identifier.doi10.1088/0960-1317/16/7/N01-
dc.description.journalClassY-
Appears in Collections:
1. Journal Articles > Journal Articles
Files in This Item:
  • There are no files associated with this item.


Items in OpenAccess@KRIBB are protected by copyright, with all rights reserved, unless otherwise indicated.